HVS Period Options, Accessories & Safety Items
Scroll down the page for current list, as posted to all HVS clubs
Published October 2020
As part of ongoing improvements to the Historic Vehicle Scheme, (HVS),Transport for NSW has compiled a list of period options, accessories and safety items which are accepted and are compliant with conditional registration under the Scheme.
Any suggested additions to the list will be reviewed and determined by Transport for NSW. Clubs may need to provide evidence of the item being available in the period/s nominated.
Approved Organisation Name:
Transport for NSW are committed to working closely with you to continually improve the Historic Vehicle Scheme and thank you in advance for any feedback you provide.
Eligibility for vehicles for inclusion in the Historic Vehicle Scheme (HVS)
Transport for NSW has compiled a defined list of period options, accessories and safety items which may help motoring clubs to determine if vehicles are eligible for inclusion in the Historic Vehicle Scheme. This list is for light vehicles it does not cover motorcycles or heavy vehicles.
The items listed below are considered acceptable period options, accessories and safety items for inclusion in the scheme.
This list will be used to determine if a vehicle is correctly registered under the scheme.
It is recommended that motoring clubs circulate this list to their members and that they provide appropriate education and advisory services
Clubs may suggest other items which they believe should be included in the list; additions will occur after consultation and shall be confirmed by Transport for NSW in writing.
The final decision as to whether an item is added to the list will be exclusively determined by Transport for NSW.
Clubs must provide evidence of the item being available in the period/s as nominated.
The installation of an item must not affect compliance with applicable vehicle standards.
1. Tuning kits offered by a manufacturer or dealer and fitted by a manufacturer or dealer (for vehicles built before July 1976 or not built to ADR 27A)
2. Tuning kits offered by a manufacturer or dealer and fitted by the vehicle owner (for vehicles built before July 1976 or not built to ADR 27A)
3. Wheel of period type conforming to VSI09 (Original Equipment Manufacturer (OEM) diameter and tyre profile for vehicles pre-1970). Both the wheels and tyres must have been available in the defined period (as stated in the technical consideration above)
4. Exhaust kits (for example, a Lukey muffler)
5. Lowering kits - maximum 25mm or 1 inch only permitted
6. Bonnet scoops
7. Sump guards
8. Airconditioning (including an under-dash system if not offered as an integrated system)
9. Water injection (for example, a Kleinig system)
10. Floor change conversions - OEM or aftermarket
11. Overdrive on gearbox - including a Laycock system or similar
12. Wire wheel conversion - whether optional or not
13. Disc brake conversions from later year of same make/model (Note: must be complete system including wheels and tyres)
14. Disc brake conversions from later model of same make (Note: must be complete system including wheels and tyres)
15. Optional engine fitment (Note:must be complete package including brakes, transmission, axles, wheels, tyres and other required items)
16. Optional Transmission change - including automatic to manual or manual to automatic conversion within manufacturer’s optional equipment
17. Half cage/single hoop roll bars in an open sportscar - CAMS or VSB14 - not allowed in sedans or Fixed Head Coupes(FHC)
18. Sun roof - OEM fitted
19. Sun roof replicating OEM (must have an accompanying VSCCS compliance certificate)
20. Webasto-type roof conversion - OEM fitted.
Note: Accessories must be able to be removed and the vehicle returned to its original (“as built”) condition.
2. Tape player - 8 track or cassette (not CD) - unless OEM fitted
4. Wheel trims and hubcaps
5. Rear window blinds that do not obstruct vision (for example, louvres are acceptable)
6. Mirrors - internal or external
7. Dash mounted fans(check regulations for applicability)
8. Additional instrumentation – dash mounted
9. Side window blinds
10. Mesh headlamp covers
11. Luggage racks (roof or boot)
12. Halda Speedpilot or TripMaster (or similar)
13. Map lamps and other internal reading lamps
14. Driving and fog lamps - including mounts
15. Badge bars
16. Bonnet mascots
17. Additional chrome strips
18. Additional reflectors - including scotch tape or otherwise
19. Demisters – including hot air or electric bar type
20. Heater - hot water type
21. Windscreen washers
22. Bug deflectors
23. Sun visors - internal or external
24. Radiator/grille and insect screens
25. Water bag carriers and water bag
26. Period metal fuel cans and wooden tool boxes on running boards
27. Additional spare wheel racks - roof or boot, running board or rear mounted racks
28. Additional horns (for example, Klaxons). Note: Must not alternate sound like an emergency vehicle. Must not be siren whistle or bell.
29. Reversing lamp/s
30. Additional stop lamps
31. Tow bar
32. Wheel spats
33. Wheel dress trims and rings
35. White wall tyres
36. Hardtop for convertibles – OEM or aftermarket.
37. Pinstriping consistent with the period style at vehicle build date
38. Auxiliary Lighting - forward facing
39. Badge Bars
1. Seat belts – must be road approved (including, for example lap, lap sash and harness varieties). The belts must comply with Schedule 2 of the Road Transport (Vehicle Registration) Regulations2017
2. Vehicles built to comply with Australian Design Rules (ADR) 4 and 5 must continue to comply
3. If a vehicle does not have seat belt mounts and seat belts are installed, they must be signed off by a suitably qualified Engineer
4. Child Restraint Anchorages (CRA) – a vehicle must comply with ADR 4 and 5
5. Direction indicators - can be white or amber (amber is preferred). The style must be in keeping with the defined period of the vehicle. Brake lamps flashing red for direction indicators are not acceptable. The replacement of semaphore type indicators is permitted.
6. Left-Hand Drive (LHD) sourced vehicles must have Right-Hand Drive (RHD) headlamps
7. Toughened glass windscreens must have a safety zone immediately in front of the driver
8. Imported vehicles may retain OEM belts. However, if the belts are fitted after importation, they must comply with Schedule 2 of theRoad Transport (Vehicle Registration) Regulations
Note: seat belts and CRA are not mandatory if the vehicle was not fitted with seat belts or CRA as an OEM fitment. However, they are strongly recommended for all vehicles where installation is possible.